It is currently Thu Mar 28, 2024 8:38 am


Hanging Branches/Leaves

Any thing to do with Tree It, post and read about it here.
  • Author
  • Message

LoliMaster99

  • Posts: 1
  • Joined: Tue Dec 04, 2018 7:42 pm

Hanging Branches/Leaves

PostTue Dec 04, 2018 7:56 pm

Is there a way to get all of the leaves hanging downwards in one direction? I'm using a willow branch texture and I need all of them to be hanging down but I can't seem to do that. If anyone could help me, that would be great. Thanks!

malikyhm

  • Posts: 3
  • Joined: Sun Aug 12, 2018 4:17 pm

Re: Hanging Branches/Leaves

PostSat Dec 15, 2018 2:52 pm

Under "Branch Distortion" and "Leaves Distortion" (Depending on if you are using polygonal branches or textures) adjust the "Bend Side Min." to around 70 and the "Bend Side Max." to around 90. Then play with the sliders without going too crazy. The two values should be relatively close to have a realistic bend distribution. I hope that helps!

Correction* The above bends the leaves laterally. If you are trying to bend them down (like gravity effect) use "Bend X" min and max but around values like -150 to -70.

Return to Tree It